【Details】
Maple 1piece neck, Ash body.
 |
 |
LEAD original small peghead, 2 rectangle string tree, "F" style
tuning gears made by Schaller.
 |
 |
|
 |
 |
251/2inch,21frets,41mm (nut width),and frets are same as 70's Stratocaster.
 |
 |
|
 |
 |
"Special Fender Cutaway Design" Body (double cutaway), strings
through bridge, 4 bolt neck plate with soft plastic cushion.
 |
 |
3 position PU selector switches (F, F&R parallel mix, R), a phase reversal
switch (PU selector mix), Master Volume Control, Master Tone Control, Output
Jack.
Volume and Tone POT is 250kΩ. Tone capacitor is 0.05μf ceramic.
PU is called X-1(It is transcribed into "wide range single coil PU"
by the catalogue) . Flat pole peace. The number of the turns of the wire
is about 9,600 (normal ST is about 7,600). Bobbin and magnet are same as
normal ST specifications.
 |
 |
|
 |
 |
2 way adjustable bridge.Bridge base width is 73mm, saddle width is 10.5mm.As for the width of the bridge base, as for 73mm, the length, as for 39mm, the thickness, it is 2.75mm. A saddle is 10.5mm PHS and is made by a die-casting (perhaps), and a hexagon nut is used not a spring for the fixation of the saddle. The screw for octave adjustment has a long 1.2.3 strings use with 20.5mm, and 4.5.6 strings use is short 17.7mm. As for potato screw 2.3.4.5 of the string high pitch economy, the leader has string use hollow from 9.45mm. As for the thing for 1.6 strings, as for the leader, an odd number is spherical at 8.0mm.
